語系
English 繁體中文 简体中文
  • Hydraulic Automatic Circular Saw Machine CH-400-5AI

Hydraulic Automatic Circular Saw Machine CH-400-5AI

CH-400-5AI Hydraulic Automatic Circular Saw Features

1.The whole roll of material is put into the material rack, and the automatic discharge does not need to be sorted out, saving time and effort,

Automatic unloading, automatic feeding, automatic sizing, automatic sawing, can be

The sawing can also be multi-sawed, the material head and the finished material are automatically separated, and the iron filings are automatically discharged.

_______________________________________________________________________________________________

Standard accessories

1.Basic machine

2.hydraulic system

3.PLC electronic control system

4.HSS saw blade 300x2.0x32x1 piece

5.Feeding rack 5 meters x 1 seat

6.Toolbox x1 set

  1. Inquiry
  2. Back
  3. Previous
  4. Next

Detailed description

CH-400-5AI Hydraulic Automatic Circular Saw Features

1.The whole roll of material is put into the material rack, and the automatic discharge does not need to be sorted out, saving time and effort,

Automatic unloading, automatic feeding, automatic sizing, automatic sawing, can be

The sawing can also be multi-sawed, the material head and the finished material are automatically separated, and the iron filings are automatically discharged.

_______________________________________________________________________________________________

Standard accessories

1.Basic machine

2.hydraulic system

3.PLC electronic control system

4.HSS saw blade 300x2.0x32x1 piece

5.Feeding rack 5 meters x 1 seat

6.Toolbox x1 set

Specification data

model CH-400-5AI
head rotation angle 90
Sawing Capacity - Solid Rod 60
Sawing Capacity - Round Tube 120
Sawing Capacity - Angle Type 80 (this material cannot be automatically cut)
Sawing Capacity - Square Tube 100 x 100 (this material cannot be automatically cut)
Sawing Capacity - Geometry 100 x 100 (this material cannot be automatically cut)
Sawing Capacity - Rectangular 80 x 150 (this material cannot be automatically cut)
host motor 5HP
Spindle speed A: 15/30 RPM
B: 30/60 RPM
C: 350/700RPM, 3400RPM
D: 3400RPM
Cooling water pump 1/8HP
Hydraulic horsepower 2 HP
The maximum opening of the clamp 150mm
Applicable saw blades 275-400mm
Feed length One feeding of 450mm, three feedings to 1350mm
Mechanical dimension(mm) L6540xW1150xH1950mm
Mechanical weight (kg) 2550kgs

Video introduction


Related Products