Horizontal aluminum cutting machine CH-510-2ASE, CH-610-2ASE

1.Cutting copper and aluminum

1.Horizontal feed, large cutting volume, saving time and effort, and increasing output.

2.The clamp adopts the design of upper pressure side clamp, the clamp pressure can be adjusted, and it can clamp irregular shape materials without using a special clamping die.

3.Hydraulic automatic advance and retreat of the tool, stable and fast tool advance.

4.Use the saw blade according to the cutting height, save material waste and reduce saw blade cost.

5.Automatic oil mist cooling, the saw blade is more durable, the cut surface is smooth, and there is no burr.

6.Concealed saw blade, low noise and high safety.

7.Use a rubber block to press the material so that the workpiece is not damaged.

8.Equipped with electronic saw blade protection device, automatic stop warning when saw blade is dull, to ensure safety and smooth cutting surface.

9.Configure the electronic sawing quantity table.

10.The sawing width can be adjusted according to the material and the sawing depth is easy to adjust.

_______________________________________________________________________________________________

Standard accessories

1.Basic machine

2.hydraulic system

3.toolbox

4.Cutting oil

5.Tungsten steel circular saw blade 1 piece

6.Saw blade protector

_______________________________________________________________________________________________

special accessories

1.rack

2.Electronic length indicator