NC numerical control type automatic circular saw machine NC-100-4AS

1.The main clamp presses up the side clamp, and the clamping is firm and accurate.

2.The feeding mechanism adopts swing type and servo motor with ball screw drive for accurate feeding, and the feeding accuracy is 0.01mm.

3.Oil mist cooling, clean and pollution-free.

4.Equipped with saw blade protection device, saw blade overload protection.

5.Touch screen operation, simple operation, ordinary operators can operate.

6.The material head, material tail and finished material are automatically separated, and the aluminum scrap is collected and processed.

7.Rocker arm feed design, combined with hydraulic motor and ball screw feed, stable feed and long tool life.

8.The three-point clamping design of the saw blade reduces the vibration of the saw blade and improves the life of the saw blade.

9.After the sawing is completed, the material is returned and the knife is returned, there is no return knife mark, the tool life is long, and the cut surface is smooth.

_______________________________________________________________________________________________

Standard accessories

1.Basic machine

2.automatic feeding rack

3.Automatic oil mist cooling system

4.Tungsten carbide saw blade 355x2.0mm

5.Working Quartz Lamp

6.Automatic oil lubrication

7.Inverter

8.Chip collector

_______________________________________________________________________________________________

special accessories

1.special rack