Semi-automatic saw blade grinder C-450-2

1.All castings are made of spheroidal graphite cast iron (FCD-45) to ensure accuracy and increase wear resistance.

2.Straight teeth (A-type teeth) and curved back teeth (B-type teeth) are easy to switch, and different saw blade thicknesses can be accurately adjusted through the gauge instructions.

3.The feed speed is adjusted by stepless speed change, which can quickly adjust the required speed with the change of the tooth pitch.

4.The high and low teeth of the C tooth type are ground at the same time, and there is an indicator table for setting to ensure accurate height difference.

5.There is no need to replace the grinding wheel for chamfering grinding, just align the indicator according to the size of the grinding wheel.

_______________________________________________________________________________________________

Standard accessories

1.10 grinding wheels

2.Indexing plate 2 pieces

3.1 work light

4.Tool 1 set

_______________________________________________________________________________________________

special accessories

1.Grinding wheel

2.Indexing plate

2.vacuum cleaner

2.Small diameter saw blade holder (minimum diameter of saw blade is 50mm)

2.Large diameter saw blade holder & moving holder (maximum saw blade diameter 650mm)