Metal Circular Saw Machine/Hydraulic Semi-Automatic Circular Circular Saw Machine CH-400-2AD

1.CH-400-2AD is a semi-automatic circular saw with automatic clamp and automatic advance and retraction. It is the most functional machine among all circular saws. It can saw round, flat, square, concave-convex, arc and curved pipe fittings. and cut grooves.

1.High safety, the saw blade transmission system is under the main body, and there is a protective cover on the sawing table. When the protective cover is lifted and the front door is opened, the automatic lowering of the knife will stop immediately, and it will not operate when all the protective systems are not ready.

2.The bottom-up sawing will not repeat the sawing, so the cutting is faster, the tool is more durable, saves costs and increases production.

3.The clamp adopts the upper pressure side clamp, the clamping is firm, the sawing precision is high, and there is no need to use a variety of clamping dies, which saves the cost and the time of changing the clamping die.

4.The clamp can be shifted back and forth, with fast shift, fast feed, no burrs, and long service life of the saw blade.

5.Equipped with an electronic saw blade protection device, the saw blade will automatically stop when it is dull or abnormal.

6.Sawing height and return depth are easy to adjust, saving time and increasing output.

7.The iron filings are centrally processed, which is convenient and clean.

8.The angle adjustment is the most convenient, fast and accurate, right 90~45 degrees, left 90~45 degrees, 180-degree grooves are provided with positioning tenons, accurate positioning and clear marking.

_______________________________________________________________________________________________

Standard accessories  

1.Basic machine

2.hydraulic system

3.safety protection system

4.overcurrent protector

5.counter

6.HSS saw blade 300x2.0x32x1 piece

7.Toolbox x1 set

8.Cutting oil x1 bottle (500cc)