Metal Circular Saw/C-370_1A_2A

1.Two-way clamp, sawing without burrs, no dust, and high precision.

2.The cutting angle can be left 90 degrees ~ 0 degrees, right 90 degrees ~ 45 degrees.

3.The cooling system water tank is in front, the design is convenient and easy to organize

4.The iron filings are centrally processed, which is convenient and clean.

_______________________________________________________________________________________________

C-370 Applicable Scope

It is a very suitable model for thick, medium, thin and solid pipes. It is driven by two sets of gears and has a large torque. It is suitable for sawing heavier workpieces. The maximum pipe diameter can reach 120mm, and the square pipe can reach 100x100mm. It is suitable for sports equipment, sheet metal factories and machinery factories.

C-370 Manual Clamp, Feed Features

Fast measurement of size, manual clamp, manual advance and retreat of the knife, can control the knife at any time according to the size of the pipe, give appropriate pressure, and the saw blade has a long life.

Features of C-370-1A Automatic Clamp, Manual Feed

In addition to the features of C-370, another feature is the automatic clamping function. When the length measurement of the sawing pipe is completed, press the switch to clamp the pipe immediately, which can prevent the risk of cutting the knife without clamping.

Features of C-370-2A automatic clamp, automatic advance and retreat

This model is used for large quantities. In addition to the characteristics of C-370-1A, when the length of the saw blade and pipe fittings is adjusted, step on the foot switch to immediately clamp and feed the knife to save production time.

_______________________________________________________________________________________________

Standard accessories

1.HSS saw blade 300x1.6x32x1 piece

2.Stop ruler x1

3.Cutting oil x1 bottle (500cc)

4.Tool x1 set

5.Fixture x1 set