CNC Double End Chamfering Machine CH-50-3A, NC-50-3A, CH-80-3A, NC-80-3A

1.The inner and outer corners and the surface of the round tube can be trimmed at one time, quickly and accurately.

2.The cutter head uses commercially available blades, which are easy and quick to replace.

3.Two-stage feed, smooth idle stroke, and the working stroke can be stably adjusted according to the cutting amount.

4.With manual and automatic functions, it is convenient to correct and adjust the machine.

5.Special automatic positioning device, which can automatically position, feed, chamfer, and fine-tune the length tolerance.

6.Oil mist lubricated cooling system increases blade life without chipping.

7.Servo motor feeding, stable and accurate feeding.

8.The chamfering length is controlled by the servo motor, and the length can be set and modified on the screen.

9.There is also a mechanism type length adjustment model (economical type)

_______________________________________________________________________________________________

Standard accessories

1.Main engine and transmission system

2.PLC automatic electronic control system

3.2 standard cutter heads

4.2 sets of knife holders (2 each for inner and outer trimming)

5.2 sets of blades (2 each for inner and outer trimming)

6.Fixture 1 set

7.Toolbox 1 set

8.Cutting Oil Spray System

_______________________________________________________________________________________________

special accessories

1.special cutter head

2.special tool holder

3.R angle blade

4.Inverter