Double head automatic chamfering machine C-60-4AL

1.The inner and outer corners and the surface of the round tube can be trimmed at one time, quickly and accurately.

2.The cutter head uses commercially available blades, which are easy and quick to replace.

3.Two-stage feed, smooth idle stroke, and the working stroke can be stably adjusted according to the cutting amount.

4.With manual and automatic functions, it is convenient to correct and adjust the machine.

5.Special automatic positioning device, which can automatically position, feed, chamfer, and fine-tune the length tolerance.

6.Oil mist lubricated cooling system increases blade life without chipping.

7.The processing length of this machine can be divided into two types: a 600-3000mm b1000-6000mm

_______________________________________________________________________________________________

Standard accessories

1.Main engine and transmission system

2.PLC automatic electronic control system

3.2 standard cutter heads (including 2 sets of cutter seat and blade)

4.1 set of molds

5.Blade locking sheet

6.toolbox

7.Cutting Oil Spray System